Panasonic BB-HCM403A Operating Instructions - Page 56
Items, Settings
![]() |
View all Panasonic BB-HCM403A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Operating Instructions • Set up the IPsec policy as below. Items Settings Protocol ANY Source Network Network address and subnet mask on the LAN side of the VPN router Source IP address A global address on the WAN side of the VPN router Destination Network A global address of the camera Destination IP address A global address of the camera 9. Access the camera (see page 11). • If you can access the camera, the IPsec setup is complete. Note • • • In IPsec communications, "IPsec" is displayed on the Top page or the Single Camera page. If you cannot communicate using IPsec, see page 23 of Troubleshooting on the CD-ROM. See the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for IPsec features. 56
![](/manual_guide/products/panasonic-bbhcm403a-operating-instructions-f68bc16/56.png)
Operating Instructions
56
•
Set up the IPsec policy as below.
9.
Access the camera (see page 11).
•
If you can access the camera, the IPsec setup is complete.
Note
•
In IPsec communications, "IPsec" is displayed on the Top page or the
Single Camera page.
•
If you cannot communicate using IPsec, see page 23 of Troubleshooting
on the CD-ROM.
•
See the Panasonic Network Camera support website at
for IPsec features.
Items
Settings
Protocol
ANY
Source Network
Network address and subnet mask on the LAN side of
the VPN router
Source IP address
A global address on the WAN side of the VPN router
Destination Network
A global address of the camera
Destination IP address
A global address of the camera