Panasonic BB-HCM403A Operating Instructions - Page 40
Setting, Description
View all Panasonic BB-HCM403A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Operating Instructions Note • • If you do not know the camera IP address when setting [Automatic Setup] or [DHCP Setup], it can be searched for by the Setup Program (see page 156). When the camera is restarted, all buffered images in the internal memory are deleted. The buffered images on the SD memory card are not deleted. Setting Allow Access from • the Internet (Automatic Setup Only) Network • Configuration from Setup Program (Static/DHCP Only) Port Number • (Static/DHCP Only) • • • IP address • • Subnet Mask (Static Only) • • Description The allow Access from the Internet setting automatically configures the router's Port Forwarding setting (some routers call it "Address Translation", "Static IP Masquerade", "Virtual Server" or "Port Mapping"). To enable Internet access to the camera, check [Yes]. In this case, the camera automatically searches for unused port number on your network in order of 80 and from 50000 to 50050. To disable Internet access to the camera, check [No]. To prohibit the Setup Program from changing the network settings, uncheck the box. The default port number is 80. When you use multiple cameras with a router on your network, each camera must be assigned its own port number (see page 58 "2.7.2 Connecting the Camera to a Router that Does Not Support UPnP™ (IPv4 Only)"). - Do not set the following port numbers. FTP: 20 and 21, Telnet: 23, SMTP: 25, DNS: 53, POP3: 110, HTTPS: 443, ICQ: 4000 and IRC: 6661-6667. Enter a number between 1-65535. Some ISPs do not allow you to use port 80. Ask your ISP or network administrator about which port numbers are accessible over the Internet. If your ISP or network administrator specifies an IP address and subnet mask, enter them in each data field. If you use the camera on a LAN, set an IP address with the same class as your PC (see page 155). Set 4 numbers (0-255) and 3 periods, such as "192.168.0.253". Note that "0.0.0.0" and "255.255.255.255" are not available. 40