Panasonic BB-HCM403A Operating Instructions - Page 94
Buffering or Transferring Images by Alarm, Signal
View all Panasonic BB-HCM403A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Operating Instructions 4.3 Buffering or Transferring Images by Alarm Signal You can buffer the camera images, transfer to an FTP server or send E-mails using alarm as a trigger. The Trigger page allows you to enable image buffer/transfer by E-mail or FTP. Note • If you are recording images to the SD memory card, refresh interval slows down. • To buffer/transfer images by alarm signal, an alarm must be connected to the external I/O (see page 151). 1. Click [Trigger] on the Setup page. 2. Click a No. to enable buffer/transfer. 3. Check [Enable Image Buffer/Transfer], select [Alarm 1 or 2] for the trigger, select [Rising: GND to Open (High).] or [Falling: Open (High) to GND.] and click [Next>]. • • • Note • Click [Delete Buffered Images] to delete images already buffered. Click [Save] to save the settings. Clicking [Cancel] takes you back to the Trigger page without saving changes. If you click [Save], all buffered images on the internal memory and SD memory card are deleted. 94