Panasonic BB-HCM403A Operating Instructions - Page 14
Confirming that You Can Access the Camera
View all Panasonic BB-HCM403A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Operating Instructions Setting up your PC 1. Click [Start] [All Programs] [Accessories] [Command Prompt]. • The Command Prompt window is displayed. 2. Enter "ipv6 install". • "Succeeded" is displayed. Note • If Windows XP Service Pack 1 or later is not installed, "Succeeded" will not be displayed. Install it on your PC. • When you use Windows XP Service Pack 2, click [Start] [Control Panel] [Security Center] [Windows Firewall] [Advanced] tab [Settings] button of ICMP in the Windows Firewall window, then check [Allow incoming router request] check box in the ICMP Settings window. 3. Enter "ipconfig". • If the IPv6 address is properly assigned to your PC, IPv6 address will be displayed in the window. Setting up the Camera Usually, an IPv6 address is automatically assigned. To assign a static IPv6 address, see page 43. To access the camera in IPv6, you need to subscribe to a domain name service such as Viewnetcam.com, and register the URL. Confirming that You Can Access the Camera Confirm that the image is properly displayed (see page 11). 14