Panasonic CF-31AGP7B2M User Manual - Page 14
Connect your computer to a power outlet., Turn on the computer., Setup Windows.
View all Panasonic CF-31AGP7B2M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
First-time Operation Getting Started 3 4 1 14 3 Connect your computer to a power outlet. The battery charging starts automatically. CAUTION Do not disconnect the AC adaptor and do not switch the wireless switch to on until the first-time operation procedure is completed. When using the computer for the first time, do not connect any peripheral device except the battery pack and AC adaptor. Handling the AC adaptor Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone. 4 Turn on the computer. A Slide and hold the power switch for approximately 1 second until the power indicator lights. CAUTION Do not slide the power switch repeatedly. The computer will forcibly be turned off if you slide and hold the power switch for 4 seconds or longer. Once you turn off the computer, wait for 10 seconds or more before you turn on the computer again. Do not perform the following operation until the hard disk drive indicator turns off. Connecting or disconnecting the AC adaptor Sliding the power switch Touching the keyboard, touch pad or touchscreen (only for model with touchscreen) Closing the display Turn on/off the wireless switch When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Wait until the computer cools down, and then turn the power on again. If the computer does not power on even after cooling down, contact Panasonic Technical Support. Any changes from the default setting of the Setup Utility must not be made until the First-time Operation is completed. 5 Setup Windows. Follow the on-screen instructions. The computer restarts several times. Do not touch the keyboard or touch pad, and wait until the hard disk drive indicator has turned off. After the computer is turned on, the screen remains black or unchanged for a while. This is not a malfunction. Wait for a moment until the Windows setup screen appears. During setup of Windows, use the touch pad and clicking to move the cursor and to click an item. Setup of Windows will take approximately 20 minutes. Go to the next step, confirming each message on the display. "Join a wireless network" screen may not appear. You can set the Wireless Network after the setup of Windows is complete. Select language on "Setup Windows" screen and click [Next]. Carefully choose your language because you cannot change it later. If you set a wrong language, you need to reinstall Windows ( page 22). For some languages, the characters on the key and inputted character may not match. Set the keyboard properly after the setup is complete. Then set the password.