Panasonic CF-74ECBAXBM Service Manual - Page 25
Disassembly/Reassembly
UPC - 092281864044
View all Panasonic CF-74ECBAXBM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
10 Disassembly/Reassembly Note: Power off the computer. Do not shut down to the Suspend or hibernation mode. Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result. 10.1. Disassembly Instructions 10.1.1. Preparation Before disassembling, be sure to make the following preparations. • Shut down Windows and turn off the power. • Disconnect the AC adaptor. • Remove the optional DIMM memory card and PCMCIA card if they are connected. • Remove other devices if they are connected. Attention: • Please execute writing BIOS ID when you exchange the Main Board. • You cannot reuse the Conductive Clothes and the heat dissi- pating parts such as Sheet and Rubber. Use new parts. 10.1.2. Removing the Battery Pack, the HDD Unit and the DVD-ROM Drive Unit 10.1.3. Removing the HDD Hook Hook Hook HDD Damper HDD Case Upper Hook HDD HDD FPC HDD Latch Knob HDD Unit Latch 2 Latch 1 Battery Pack 6 4 5 7 MP Latch 1 2 3 DVD-ROM Drive Unit Battery Pack 1. Slide the Latch 1 to unlock. (1) 2. Slide the Latch 2 (2), and then without releasing it, slide and remove the Battery Pack. (3) HDD Unit 1. Slide the HDD Latch Knob (4), and then without releasing it, slide and remove the HDD Unit. (5) DVD-ROM Drive Unit 1. Push the MP Latch (6), and then without releasing it, slide the DVD-ROM Drive Unit. (7) HDD Case 1. Remove the six Hooks, and remove the HDD Case Upper. 2. Remove the HDD Damper. 3. Disconnect the HDD from the HDD FPC. 10-1