Panasonic CF-74ECBAXBM Service Manual - Page 38
Setting the DC-IN PCB and I/O PCB
UPC - 092281864044
View all Panasonic CF-74ECBAXBM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
10.2.7. Setting the DC-IN PCB and I/O PCB 1. Fit the Modem Cable and LAN Cable between the MODELAN Holders, and set them on to the computer. 2. Fix the I/O PCB to the I/O Plate using the four Screws. 3. Fix the I/O PCB with I/O Plate to the computer using the two Screws. 4. Fix the DC-IN PCB to the computer using the two Screws. Screws : DFHE5025XA Screws : DFHE5035ZB Modem Cable LAN Cable MODELAN Holder DC-IN PCB I/O PCB MODELAN-2 Holder I/O Plate n Arranging the DC-IN Cable DC-IN PCB Safety Working Set the Core of the Modem over the DC-IN Cable. DC-IN Cable Turn the DC-IN Cable halfway (counterclockwise) Connect the Connector 0~3mm 0~3mm FAN Cable Sheet Avoid runnning over the boss. Safety Working (Otherwise the Cable will be caught at the Bottom Cabnet.) Fix the Core using the Tape. INV. Cable Attach the Cable avoiding overlapping (DC-IN Cable and INV Cable). Safety Working Set the INV Cable under the DC IN Cable. Fold back the end of Tape. 10-14