Panasonic CF-74ECBAXBM Service Manual - Page 44
Setting the Keyboard
UPC - 092281864044
View all Panasonic CF-74ECBAXBM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
10.2.14. Setting the Keyboard 1. Connect the KBD FPC Cable to the Connector (CN25) of the Main PCB. 2. Connect the two Cables of the Keyboard to the two Connectors on the KBD FPC. 3. Remove the Release Paper of the KBD WP Sheet, and attach the KBD WP Sheet to the computer as it covers the Cable of the Keyboard. Note: Press strongly enough until the color of the contact of two-sided tape is changed. Connectors KBD FPC KBD WP Sheet Connector (CN25) 4. Insert the front Hooks of the Keyboard and the FPC to the computer, and set the Keyboard to the computer. 5. Fix the KBD Angle L and R using the four Screws. 6. Hook the six front Hooks of the Center Cover to the KBD Angle L and R. 7. Hook the seven rear Hooks of the Center Cover to the computer, and press the Center Cover to be securely set in. Screws : DFHE5025XA Center Cover Hooks KBD Angle L Hooks n Cautions for Setting the Center Cover Center Cover Hook with the front hooks. (six points) Note: Do not allow any gaps when aligning the front hooks. Keyboard Push in the claws on the rear side of the dome. (two each on the left and right) Push until they are snapped on. KBD Angle R Safety Working When setting the Center Cover, fit the Lead Wire in the unit and avoid it from being caught inside the dome. Ensure the Cable does not run in this area. 10-20