Panasonic CF-74ECBAXBM Service Manual - Page 41
Setting the Wireless Module and MDC Module
UPC - 092281864044
View all Panasonic CF-74ECBAXBM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
10.2.10. Setting the Wireless Module and MDC Module 1. Connect the Modem Cable to the Connector, and fix the MDC Module to the Main PCB using the two Screws. 2. Connect the Wireless Module to the Connector of the Main PCB, and fix it using the two Screws. 3. Connect the two Antenna Cables to the two Connectors Wireless Module on the Wireless Module. • Antenna Cable (Black): MAIN Connector • Antenna Cable (Gray): AUX Connector Screws : DFHE5025XA MDC Module Antenna Cable (Black) Antenna Cable (Gray) Modem Cable n Arranging the Modem Cable MDC Module Arranging the Modem Cable Safety Working 10-3mm Safety Working Ensure the Kapton Tape is overlapping the Shrink Tube by 1 mm or more. Ensure the Cable does not run over the Screw. Ensure the Cable does not come over the end of the MDC Module. Kapton Tape Pass the Cable over the CCC mark. Fix the Connector using the Tape. Modem Cable Fold back and attach to the back side of the MDC Module. Ensure both of the inlet and outlet of the Cable are within the frame. Avoid any stress on the outlet of the Cable. Coming over the end of the Screw. Safety Working Coming over the end of the Screw. Coming outside of the frame. 10-17