Panasonic CF-74ECBAXBM Service Manual - Page 43
Setting the Speaker and the LED PCB
UPC - 092281864044
View all Panasonic CF-74ECBAXBM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
10.2.13. Setting the Speaker and the LED PCB 1. Fix the LED PCB using the two Screws. 2. Set the Speaker L and R to the computer. 3. Connect the Speaker Cable L and R to the two Connec- tors (CN1002, CN1003) on the LED PCB. 4. Fix the Speaker Cable L and R using the Tape. 5. Fix the Speaker L and R using the Speaker Holder. Note: Ensure the three Hooks of the Speaker Holder are securely set in the computer. Screws : DFHE5025XA CN1002 Tape Speaker Holder Speaker L CN1003 LED PCB Tape Speaker Holder Speaker R n Soldering the Speaker Cable and Setting the Speaker Rubber Speaker Speaker Rubber Soldering Soldering White Line Red Line Red Line Speaker White Line Speaker Cable Speaker Cable n Cautions for Setting the Speaker Safety Working Tape Speaker Holder Speaker L Pass the Speaker Cables through the notch. (Avoid running over.) Ensure the Cable does not touch the Steel Plate. Set as the loop of the Speaker Cable is on the upper side. Tape Fit to the stand wall. SP Conductive Cloth L Fit to the corner. SP Conductive Cloth R Speaker Holder Speaker R Speaker L Speaker R Securely attach the SP Conductive Cloth to the round frame of the Speaker. Ensure the Hooks are securely set in. (3 points) Pass the Speaker Cables through the notch. (Avoid running over.) 10-19