Panasonic CF29LTQGZBM CF29L3LGZBM User Guide - Page 17

NOTE The power saving function is factory set, so if there is no input from a key, the touch pad, the touchscreen (only for models with touchscreen) or an external mouse (when one is connected) for a certain interval of time, the power to the LCD and hard disk may be turned off. The LCD will resume operation when the touch pad, the touchscreen (only for models with touchscreen) or an external mouse (when one is connected) is used or a key is pressed. The power to the LCD may be turned off even when an application software is being installed. In this case, because it is conceivable that a selection dialog box will be shown, do not press Space or Enter to attempt to resume from this condition as doing so may trigger a selection, but instead, press a key unrelated to the direct triggering of a selection, like Ctrl . In addition, when the computer is left alone, it automatically enters the standby or hibernation mode. The computer will resume by sliding the power switch. ( "Standby/Hibernation Functions") If [Enter Password] is displayed Enter your password*1 and press Enter . ( "Security Measures") Enter Password [ ] The correct password Three incorrect attempts or No password for about a minute Will Start Will Not Start (Power off) *1 Supervisor Password or User Password set in the Setup Utility (not the Windows password). Operation 17