Panasonic CF29LTQGZBM CF29L3LGZBM User Guide - Page 30
Battery Indicator continued, Touch Pad / Touchscreen only for models with touchscreen, Reference
View all Panasonic CF29LTQGZBM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Dealing with Problems (Summary) Battery Indicator (continued) The battery indicator blinks green and orange alternately The orange indicator blinks Warming up the system to prevent hard disk drive malfunctions at low temperature. Leave your computer as is. Once the allowable temperature range requirement is satisfied, your computer will start automatically. Battery cannot be recharged temporarily because the internal temperature of the battery pack is outside of the acceptable temperature range for recharging. Once the allowable range requirement is satisfied, charging begins automatically. Your computer can be used normally in this state. Touch Pad / Touchscreen (only for models with touchscreen) The cursor cannot be controlled properly Unable to input using the touch pad Unable to point correctly with the stylus included with the computer Unable to input by touching the display If you are using an external mouse, ensure that the external mouse has been connected correctly. Restart the computer by using the keyboard (Press , U , and select [Restart] with R ). If the computer does not respond to keyboard commands, read "No response" ( page 31). Has the Setup Utility been used to set [Touch Pad] to [Enable]? When external mouse drivers are installed (e.g., Intellimouse), the touch pad may not be used. Has the touch pad driver been properly installed? As a result of the physical characteristics of the touchscreen, sometimes the position of the stylus does not match the position of the cursor on the screen. This is not a malfunction. Perform [Calibration] ( page 14). Has the Setup Utility been used to set [Touchscreen] to [Enable]? When mouse drivers are installed (i.e. IntelliMouse), the touchscreen is unable to be used. Reinstall the touchscreen driver. Has the touchscreen driver been properly installed? Reference Manual The Reference Manual is not displayed Is Adobe Reader installed? If you have uninstalled Adobe Reader, install using the following procedures. 1 Select [start] - [Run], input [c:\util\reader\AdbeRdr70_enu_full.exe], then select [OK]. Install Adobe Reader by following the instructions on the screen. SD Memory Card Cannot log on with the SD Memory Card Windows logon user name and password are not set in the SD Memory Card correctly. Enter the Windows user name and password without using the SD Memory Card. After logging on, set the same user name and the password on the SD Memory Card and Windows, using the following operation. • Change the setting of the SD Memory Card by [SD Card Setup]. ( "SD Memory Card Security Function") Troubleshooting 30