Panasonic CQVX100U In-dash Dvd Monitor - Page 43

English ❑ Product Servicing If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic Servicenter. The product should be serviced only by a qualified technician. ❑ Replacing the Fuse Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher rating, or connecting the product directly without a fuse, could cause fire or damage to this unit. If the replacement fuse fails, contact your nearest Panasonic Servicenter for service. ❑ If the Unit Begins to Malfunction... Reset switch Remove the face plate (a page 13) and insert a hard, 42 slender stick into the hole and push the switch. Important Push the switch only when the unit fails to operate with any buttons. (Stored settings and adjustments are not cleared.) If the unit fails to return to normal condition, call the nearest Panasonic Servicenter and ask for repairs. CQ-VX100U TILT OPEN AV1 IN Reset switch Note: ¡If the ID-CODE has been already set, you will be asked to enter the ID-CODE right after the unit is restarted. Maintenance ❑ Cleaning this Unit Your product is designed and manufactured to ensure a minimum of maintenance. Use a dry soft cloth for routine exterior cleaning. Never use benzine, thinner or other solvents. TThhiinnnneerr AAllccohol PPeesticide WWaax BBeennzzine To remove stubborn stains 1 Moisten the soft cloth in dishwashing soap diluted with water and wring well. 2 Wipe lightly. Go over the same surface with a dry cloth. Note: ¡Since there is the possibility of water drops getting inside of the unit, do not directly apply cleanser to the surface. ¡Do not scratch the screen with your nails or other hard objects. The resulting scratches or marks will obscure the images. Caution ¡If water drops or similar wet substances get inside the monitor, it may cause a malfunction. CQ-VX100U 43