Panasonic DMC-ZS40K DMC-ZS40K Owner's Manual (English) - Page 36

Troubleshooting The Wi-Fi connection is not recognizing my PC. ● By default, the Wi-Fi connection uses the default workgroup name of "WORKGROUP". If the name of the workgroup has been changed, it will not be recognized. Select [PC Connection] then [Change Workgroup Name] in the [Wi-Fi Setup] menu to change the workgroup name to match that of your PC. The GPS status indicator lights up while the camera is turned off. ● [GPS Setting] is [ON]. → Electromagnetic waves from the camera can affect instruments and meters. In airplane cabins (during takeoff and landing) or in other restricted areas, set [Airplane Mode] to [ON], and then turn off the camera. Positioning takes time. ● When using the camera for the first time or after not using it for a while, positioning may take several minutes. ● Positioning usually takes less than two minutes, but because the positions of the GPS satellites change, it may take longer depending on the recording location and environment. → Positioning can be executed faster when you download GPS assist data to the camera using the "GPS Assist Tool". ● Positioning will take time in environments where it is difficult to receive the signals from the GPS satellites. The location name information is different from the recording location. ● Immediately after the camera is turned on or when the GPS icon is something other than [ ], the location name information that is recorded in the camera may vary significantly from the current position. ● When [ ] is displayed for the location name information, the information can be changed to a different candidate before starting to record. You can edit a place name or landmark name recorded in a picture. Please refer to "Owner's Manual for advanced features (PDF format)" for details. 36 VQT5E54 (ENG)