Panasonic DMPBDT300 DMPBDT300 User Guide - Page 39
Recommended audio output setting, Press [SETUP], Audio, Set each item
View all Panasonic DMPBDT300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Recommended audio output setting The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the items. Press [SETUP] > "Audio" > Set each item For details of the each item, refer to page 31. Example of connected equipment Setup menu TV via HDMI*1 Receiver with HD audio*2 decoder via HDMI Receiver without HD audio*2 decoder via HDMI Receiver via COAXIAL or OPTICAL Receiver via analog output*3 "Digital Audio Output" "Dolby D/Dolby D +/Dolby TrueHD" "DTS/DTS-HD" "BD-Video Secondary Audio" "PCM" "PCM" "Off" "Bitstream" "Bitstream" "Off" "PCM" "PCM" "Off" "PCM" "PCM" "Off" No effect No effect "Off" "PCM Down Conversion" No effect No effect No effect "Off"*4 No effect "Downmix" "Stereo" No effect No effect "Stereo"*5 No effect "High Clarity Sound" "Enable" "Disable"*6 "Disable"*6 "Disable"*6 ≥ Because underlined items are the factory presets, it is not necessary to change these settings. *1 If connected to TV via the COAXIAL, OPTICAL or AUDIO OUT terminal, these settings have no effect. *2 HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio *3 Set "Analog Audio Output" to "7.1ch" or "2ch (Downmix) + 5.1ch". (Press [SETUP] > TV / Device Connection) *4 If the connected equipment that does not support 96 kHz, set to "On". *5 If the connected equipment that supports the virtual surround function, set to "Surround encoded". *6 When connected to TV via the HDMI terminal for outputting image, set to "Enable". "Disable"*6 Reference 39 VQT2J87 (ENG)