Panasonic DMREH75VS Dvd Recorder - English/ Spanish - Page 49

Playing backPlaying a video cassette Adjusting the playback picture ∫ Manual tracking The unit usually makes tracking adjustments, but you may need to do it manually if noise appears on a tape recorded on other equipment. During play Press [TRACKING/V-LOCK, r] or [TRACKING/V-LOCK, s]. Repeat until the noise disappears. ∫ Vertical locking adjustment Adjust the vertical synchronization to stop the picture from jiggling while paused. This works only while VHS is paused during recording on the DVD. While paused Press [TRACKING/V-LOCK, r] or [TRACKING/V-LOCK, s]. Repeat until the jiggling stops. ∫ To return to auto tracking Press both [TRACKING/V-LOCK, r] and [TRACKING/V-LOCK, s] simultaneously. ∫ To remove the noise from a paused picture Start slow play, then adjust the tracking. Note ≥This function may not work with some TV models and tapes. ≥You can also adjust the tracking and vertical synchronization with [CH, W, X] on the main unit. VHS Index Search System (VISS) The unit automatically records special index signals on the tape every time a recording is started. The index search function makes use of these index signals to let you find the beginning of a desired program quickly and easily. ∫ Index signals are recorded in the following cases. ≥When a recording is started by pressing [¥, REC]. Preparation ≥Insert a recorded video cassette. (l 12) While stopped or during normal play Press [:] or [9]. ≥Each press increases the number of skips. VHS cassette 6 12 C ∫ To cancel the index search Press [∫, STOP]. Note ≥Up to 20 index signals can be searched for in both directions. ≥If you press either one of the buttons too much, you can control the number of skips by pressing the opposite button. ≥The figure on the display decreases by 1 each time an index signal is located. ≥This feature may not work correctly if the index signals are too close together. Make recordings of at least 5 minutes. Changing audio While playing tapes Press [AUDIO]. The audio changes as follows: Stereo > Mono L > Mono R > No display (Normal audio track) Auto Bilingual Choice Function When a stereo broadcast or SAP broadcast is recorded and played back on the unit, stereo sound will be automatically selected in the case of a stereo broadcast and SAP sound will be automatically selected in the case of a dual-sound broadcast (Mono and SAP or Stereo and SAP). ≥This function may not work properly if the program is played back from a mid point. In a case like this, press [AUDIO] and select the right sound. ≥The function will not work with a cassette which has been recorded using external equipment. S-VHS Quasi Playback (SQPB) It is also possible to play back tapes recorded in the S-VHS system. ≥Some picture noise may occur depending on the type of tape used. ≥It is not possible to fully obtain the high resolution that S-VHS is capable of. ≥It is not possible to record in the S-VHS system with the unit. 49 RQT8346