Panasonic DVD-LX9 Portable Dvd - Page 43

Troubleshooting Guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem: In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail [email protected], or the website (http://www. panasonic.com). In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you. Reference pages are shown as black circled numbers ≥You cannot turn on the unit with the remote control if the unit is powered by the battery pack. Unit turns off automatically. Unit doesn't work when powered by battery. ≥The unit turns off after it has been stopped for about 15 minutes (5 minutes when the unit is powered by the battery pack) to conserve power. Turn the unit on again. ≥The unit and battery pack have protection circuitry that activate if they become too hot or too cold. They will not work if this occurs. Use the unit and battery pack between 5 oC (41 oF) and 35 oC (95 oF). Cannot charge or the [CHG] indicator fails to light. ≥The battery pack can only be recharged when the unit is off. ≥The charging time increases when the temperature is too hot or too cold, and charging may not be possible under some circumstances. ≥Check connection to the AC adaptor. < Play time dramatically ≥The battery pack has reached the end of its service life (it can be reduces after recharging. recharged about 300 times). Operation No response when buttons are pressed. ≥Some discs prohibit certain operations. ≥If there is no response at all, the unit may have been affected by lightning or static electricity. Try turning the unit off and on again. Alternatively, turn the unit off, disconnect the power source (AC or battery pack) reconnect the power and turn the unit on again. Play fails to start or stops soon after starting. ≥Condensation may have formed in the unit. Wait 1 or 2 hours for it to clear. ≥This unit cannot play discs other than those specified. 8 ≥Clean the disc. 9 ≥Ensure the disc is inserted correctly. @ ≥Check that the disc has something recorded on it. Reference The file recorded on SD is not displayed. ≥Some files are not compatible with this unit and cannot be played back. For example: -Moving picture files recorded using a digital still camera with moving picture function ≥-IC recorder voice files etc No operation with remote control. ≥Check that the battery is inserted correctly. ? ≥Replace the battery if it is drained. ? ≥Aim the remote control at the remote control signal sensor. ? The audio soundtrack or subtitle language cannot be changed. ≥This function is dependent on software availability. ≥Some DVDs require you to change the languages through menus. Subtitles not shown. ≥This function is dependent on software availability. ≥Turn the subtitles on. N ≥Subtitle position is wrong. Adjust the position. N RQT6912 Angles cannot be changed. ≥This function is dependent on software availability. There may be parts of multi-angle DVDs where different angles are not recorded. You have forgotten your ≥Do the following to reset the unit to its original factory settings (SD settings ratings password. are unaffected). While the unit is stopped, press and hold [;], [:] You want to reset the unit to the factory settings. (backward), and [1, ON] on the main unit for about 3 seconds until the message "Initialized" disappears from the display, then turn the unit off. 43