Panasonic HC-X1 Basic Operating Manual - Page 15
Remote operations with an iPad
View all Panasonic HC-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
A USB 3.0 (Host mode) B External media device (commercially-available) Connecting to an external monitor Connect an external monitor to output images. A AV cable*1 B HDMI cable*2 C External monitor *1 Use a commercially-available AV cable. *2 Use a commercially-available High Speed HDMI cable. If possible, we recommend using a cable with a length of 3 m (9.84 feet) or less. When connecting with an HDMI cable using an HDMI-to-DVI converter, etc., be sure to connect the HDMI cable to the connector of this unit last. Connecting the HDMI cable to the connector of this unit first may result in malfunction. Remote operations with an iPad Attaching a wireless module that support this unit (AJ-WM50, AJ-WM30: optional*) to the USB HOST terminal of this unit allows you to connect to a wireless LAN network. You can perform the following operations by connecting this unit and an iPad on which the AG ROP application is installed: ≥ Checking the camera status ≥ Checking the thumbnail images of recorded scenes ≥ Playing back scenes recorded as sub recordings with [DUAL CODEC REC] set to [FHD 8Mbps] ≥ Controlling the camera remotely (recording control and Time Code/User Information operations) * It may not be available in some countries. 15 (ENG) DVQX1101