Panasonic HC-X1 Basic Operating Manual - Page 20

Opening/closing the lens cover, Adjust the length of the hand strap so that it fits your hand.,

Page 20 highlights

∫ Opening/closing the lens cover You can open/close the lens cover by sliding the lens cover open/close lever. ≥ When this unit is not in use, close the lens cover to protect the lens. OPEN CLOSE ≥ Do not press the lens cover hard. This may damage the lens or the lens cover. ≥ Depending on the various filters or the MC protector attached to the front side of this unit's lens, you may not be able to open/close the lens cover or attach the lens hood. ∫ Adjust the length of the hand strap so that it fits your hand. Adjust the hand strap according to the size of your hand. ≥ If you find it difficult to fasten the buckle B, move the pad A forward, and fasten the buckle B again. 1 Open the buckle.  2 Pull the end of the belt.   ∫ Attaching the eye cup 1 Align the mounting mark on the eye cup mount with the corresponding mark on the eyecup. 2 Attach the eye cup so that the notch on the eye cup mount is aligned with the protrusion inside the eye cup.   A Mounting marks B Notch C Protrusion  ≥ Push the eye cup in until it reaches the mounting mark. (D) 20 DVQX1101 (ENG)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58

20
DVQX1101 (ENG)
Opening/closing the lens cover
You can open/close the lens cover by sliding the lens cover open/close lever.
When this unit is not in use, close the lens cover to protect the lens.
Do not press the lens cover hard. This may damage the lens or the lens cover.
Depending on the various filters or the MC protector attached to the front side of this unit's lens,
you may not be able to open/close the lens cover or attach the lens hood.
Adjust the length of the hand strap so that it fits your hand.
Adjust the hand strap according to the size of your hand.
If you find it difficult to fasten the buckle
B
, move the pad
A
forward, and fasten the buckle
B
again.
Attaching the eye cup
1
Align the mounting mark on the eye cup mount with the corresponding mark on
the eyecup.
2
Attach the eye cup so that the notch on the eye cup mount is aligned with the
protrusion inside the eye cup.
Push the eye cup in until it reaches the mounting mark.
(
D
)
1
Open the buckle.
2
Pull the end of the belt.
A
Mounting marks
B
Notch
C
Protrusion
OPEN
CLOSE