Panasonic HC-X1 Basic Operating Manual - Page 35

Recording Manual Recording FOCUS  A M ʿ A IRIS button B FOCUS A/M/¶ switch SEL/ PUSH SET  C Jog dial D SHUTTER button  E WHITE BAL button IRIS F GAIN button SHUTTER  G Iris ring H Focus ring   GAIN  WHITE BAL  Focus Perform focus adjustments using the focus ring. If auto focusing is difficult due to the conditions, then use Manual Focus. ≥ Switch to Manual Mode. (l 33) 1 Set the FOCUS A/M/¶ switch to [M] to enable Manual Focus. ≥ It will switch to MF from AF. 2 Adjust the focus by rotating the focus ring. White Balance Automatic White Balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the White Balance manually. ≥ Register [AWB] (Auto White Balance) to a USER button. (l 37) It is assigned to the USER9 button by default. ≥ Switch to Manual Mode. (l 33) 1 Press the WHITE BAL button to switch to [Ach], [Bch], or [PRST]. ≥ The setting changes each time you press the button. [Ach] # [Bch] # [PRST] ≥ If you switch to [PRST], the White Balance mode set in [WB PRESET] will be displayed. 2 (If you have switched to [PRST]) Press the USER button to which [AWB] is registered or touch the applicable USER button icon to change the White Balance mode. ≥ The mode will change each time you press the USER button to which [AWB] is registered or touch the applicable USER button icon. [P3200K] # [P5600K] # [VAR] ≥ It is not possible to change the White Balance mode without registering [AWB] to a USER button. 35 (ENG) DVQX1101