Panasonic HC-X1 Basic Operating Manual - Page 46

Problem The unit arbitrarily stops recording. Color or brightness of the image changes, or you may see horizontal bars in the image. The LCD monitor flickers indoors. Recording Check points ≥ Use an SD card that can be used for motion picture recording. (l 26) ≥ The recordable time may have shortened due to the deterioration of the data writing speed or repeated recording and deletion. Using the unit, format the SD card. (l 32) ≥ Color or brightness of the image may change, or you may see horizontal bars in the image when the object is recorded under fluorescent light, mercury light or sodium light, etc., but this is not a malfunction. ≥ Change settings as follows: j Set this unit to Auto Shutter Mode. j Adjust the shutter speed to 1/50, 1/60 or 1/100. ≥ Adjust the Synchro Scan shutter speed. Problem Scenes/still pictures cannot be played back. Playback Check points ≥ Any scenes/still pictures where the thumbnails are displayed as cannot be played back. ≥ In most cases, is displayed for the following scenes: j Scenes recorded with another device or edited with editing software j Scenes with damaged data ≥ The thumbnails of scenes with a different system frequency are indicated with . You can play them back by changing the [SYSTEM FREQ] setting. (l 32) Please refer to "Operating Instructions (PDF format)" for details. 46 DVQX1101 (ENG)