Panasonic HC-X1 Basic Operating Manual - Page 24

Inserting/removing the battery, Charging and recording time

Page 24 highlights

Inserting/removing the battery Install the battery by inserting it in the direction shown in the figure. ≥ Insert the battery until it clicks and locks. Removing the battery Make sure that the power switch is set to OFF and the status indicator is turned off, and then remove by holding onto it taking care not to drop. (l 28) While pressing the battery release button, remove the battery. Charging and recording time Charging/Recording time Battery model number Voltage/Capacity (minimum) Supplied battery/ AG-VBR59 (optional) 7.28 V/5900 mAh Charging time 3 h 20 min System Frequency setting (l 32) 59.94 Hz 50.00 Hz Continuously recordable time 3 h 25 min 3 h 35 min ≥ The above charging times apply when the supplied battery charger is used. ≥ The times given apply when the ambient operating temperature is 25 oC (77 oF) and the relative operating humidity is 60%. Charging time may be longer at other temperatures and humidity levels. ≥ The continuous recordable time given applies under the conditions below. The time becomes shorter under other conditions. j The LCD monitor is open j A cable is not inserted to the external output terminal ≥ "h" is an abbreviation for hour, "min" for minute and "s" for second. ≥ These times are approximations. ≥ The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/ low temperature. 24 DVQX1101 (ENG)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58

24
DVQX1101 (ENG)
Inserting/removing the battery
Charging and recording time
The above charging times apply when the supplied battery charger is used.
The times given apply when the ambient operating temperature is 25
o
C (77
o
F) and the relative
operating humidity is 60%. Charging time may be longer at other temperatures and humidity
levels.
The continuous recordable time given applies under the conditions below. The time becomes
shorter under other conditions.
j
The LCD monitor is open
j
A cable is not inserted to the external output terminal
“h” is an abbreviation for hour, “min” for minute and “s” for second.
These times are approximations.
The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as high/
low temperature.
Install the battery by inserting it in the
direction shown in the figure.
Insert the battery until it clicks and locks.
Removing the battery
Make sure that the power switch is set to OFF and the
status indicator is turned off, and then remove by holding
onto it taking care not to drop. (
l
28)
While pressing the battery release button, remove
the battery.
Charging/Recording time
Battery model
number
Voltage/Capacity
(minimum)
Charging
time
System
Frequency setting
(
l
32)
Continuously
recordable time
Supplied battery/
AG-VBR59 (optional)
7.28 V/5900 mAh
3 h 20 min
59.94 Hz
3 h 25 min
50.00 Hz
3 h 35 min