Panasonic HC-X1000 HC-X1000 Owner's Manual (English) - Page 22
Connecting to the AC outlet, Battery capacity indication
View all Panasonic HC-X1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
≥ "h" is an abbreviation for hour, "min" for minute and "s" for second. ≥ These times are approximations. ≥ The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/ low temperature. Recordable time also varies depending on the [REC FORMAT] setting. ≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping recording, turning the unit on/off, moving the zoom lever etc. ≥ The batteries heat up after use or charging. This is not a malfunction. Battery capacity indication ≥ The display changes as the battery capacity reduces. If the battery discharges, then will flash red. # # # # Connecting to the AC outlet The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always "live" as long as the AC adaptor is connected to an electrical outlet. Important: ≥ Use the supplied AC adaptor. Do not use the AC adaptor of another device. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit. 1 Connect the AC cable to the AC adaptor and the AC outlet. ≥ Use the AC cable (K2CB2YY00106; supplied) dedicated for the AC adaptor. 2 Connect the AC adaptor to the DC input terminal [DC IN]. ≥ Make sure to set the power switch to OFF and the status indicator is turned off when disconnecting the AC adaptor. (l 25) A AC cable (K2CB2YY00106; supplied) ≥ Insert the plugs as far as they will go. ≥ Even when you use the AC adaptor for recording images, keep the battery connected. This allows you to continue the recording even if a power failure occurs or the AC adaptor is unplugged from the AC outlet by accident. 22 SQT0477 (ENG)