Panasonic HC-X1000 HC-X1000 Owner's Manual (English) - Page 9

About Condensation, Caution regarding laser beams - 4k

Page 9 highlights

MP4*2, 3: This recording method is suitable for playback and editing on a PC. Audio is recorded in AAC. *2 Those methods are not compatible with motion pictures recorded in AVCHD format. *3 Those methods can record motion pictures in formats that support 4K. 4K motion pictures offer a resolution four times higher than that of full highdefinition motion pictures. AVCHD: This recording method is suitable for playback on a high-definition TV or storage on a disc. Audio is recorded in Dolby® Digital. ∫ Regarding system frequencies The NTSC/PAL standard setting of this unit can be switched in [SYSTEM FREQ]. (l 30) ≥ To use this unit in regions where the TV broadcasting system is NTSC, set it to [59.94Hz(NTSC)]. To use this unit in regions where the TV broadcasting system is PAL, set it to [50Hz(PAL)]. (Playback is not possible on TVs and other devices with a standard that differs from the system frequency setting of this unit.) ≥ If you record an AVCHD scene on the SD card, it cannot be used with a different system frequency. Use another SD card when you change the system frequency. ∫ Indemnity about recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit. ∫ About Condensation (When the lens, the viewfinder or LCD Monitor is fogged up) Condensation occurs when there is a change in temperature or humidity, such as when the unit is taken from outside or a cold room to a warm room. Please be careful, as it may cause the lens, the viewfinder or LCD monitor to become soiled, moldy, or damaged. When taking the unit to a place which has a different temperature, if the unit is accustomed to the room temperature of the destination for about one hour, condensation can be prevented. (When the difference in temperature is severe, place the unit in a plastic bag or the like, remove air from the bag, and seal the bag.) When condensation has occurred, remove the battery and/or the AC adapter and leave the unit like that for about one hour. When the unit becomes accustomed to the surrounding temperature, fogginess will disappear naturally. ∫ About security Be careful about the possibility of theft or loss of the unit, and be careful not to leave the unit unattended. Please note that Panasonic does not accept any responsibility for the compromise, manipulation, and loss of information caused by these events. ∫ Caution regarding laser beams The lens may suffer damage if struck by a laser beam. Make sure that laser beams do not strike the lens when shooting in an environment where laser devices are used. ∫ Cards that you can use with this unit SDHC Memory Card and SDXC Memory Card ≥ 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cards that do not have the SDXC logo are not based on SD Memory Card Specifications. ≥ Refer to page 23 for more details on SD cards. 9 (ENG) SQT0477

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

9
(ENG) SQT0477
MP4
*2, 3
:
This recording method is suitable for playback
and editing on a PC. Audio is recorded in AAC.
*2
Those methods are not compatible with
motion pictures recorded in AVCHD
format.
*3
Those methods can record motion
pictures in formats that support 4K. 4K
motion pictures offer a resolution four
times higher than that of full high-
definition motion pictures.
AVCHD:
This recording method is suitable for playback
on a high-definition TV or storage on a disc.
Audio is recorded in Dolby
®
Digital.
Regarding system frequencies
The NTSC/PAL standard setting of this unit can
be switched in [SYSTEM FREQ]. (
l
30)
To use this unit in regions where the TV
broadcasting system is NTSC, set it to
[59.94Hz(NTSC)]. To use this unit in regions
where the TV broadcasting system is PAL,
set it to [50Hz(PAL)]. (Playback is not
possible on TVs and other devices with a
standard that differs from the system
frequency setting of this unit.)
If you record an AVCHD scene on the SD
card, it cannot be used with a different
system frequency. Use another SD card
when you change the system frequency.
Indemnity about recorded
content
Panasonic does not accept any responsibility
for damages directly or indirectly due to any
type of problems that result in loss of recording
or edited content, and does not guarantee any
content if recording or editing does not work
properly. Likewise, the above also applies in a
case where any type of repair is made to the
unit.
About Condensation
(When the lens, the viewfinder
or LCD Monitor is fogged up)
Condensation occurs when there is a change in
temperature or humidity, such as when the unit
is taken from outside or a cold room to a warm
room. Please be careful, as it may cause the
lens, the viewfinder or LCD monitor to become
soiled, moldy, or damaged.
When taking the unit to a place which has a
different temperature, if the unit is accustomed
to the room temperature of the destination for
about one hour, condensation can be
prevented. (When the difference in temperature
is severe, place the unit in a plastic bag or the
like, remove air from the bag, and seal the bag.)
When condensation has occurred, remove the
battery and/or the AC adapter and leave the
unit like that for about one hour. When the unit
becomes accustomed to the surrounding
temperature, fogginess will disappear naturally.
About security
Be careful about the possibility of theft or loss of
the unit, and be careful not to leave the unit
unattended. Please note that Panasonic does
not accept any responsibility for the
compromise, manipulation, and loss of
information caused by these events.
Caution regarding laser beams
The lens may suffer damage if struck by a laser
beam. Make sure that laser beams do not strike
the lens when shooting in an environment
where laser devices are used.
Cards that you can use with
this unit
SDHC Memory Card and SDXC Memory
Card
4 GB or more Memory Cards that do not have
the SDHC logo or 48 GB or more Memory
Cards that do not have the SDXC logo are
not based on SD Memory Card
Specifications.
Refer to page 23 for more details on SD
cards.