Panasonic KX-HNC805 Installation Guide - Page 18
Setting up the camera (initial setup
View all Panasonic KX-HNC805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Setup Setting up the camera (initial setup) Confirm the following before you begin. - Make sure you have installed the [Home Network] app on your mobile device - Make sure the camera is located within range of your wireless router - Make sure your mobile device is connected to your wireless router - Make sure your mobile device can connect to the Internet - Make sure you know the network name (SSID) and password assigned to your wireless router Initial setup (for iPhone, iPad users) R Do not perform this procedure if you want to integrate the camera with your Home Network System. Use the procedure on page 23. R If your mobile device is already registered to a hub and you want to use your camera by itself, see "Information for current hub users", page 21. 1 Plug in the camera and wait about 1 minute for the camera's LED to light in green. R If the LED does not light in green, or if you experience trouble during this procedure, reset the camera (page 24) and then repeat this procedure. 2 Start the [Home Network] app. R If prompted, follow the on-screen instructions and select the appropriate region/country. 3 Tap [HD Camera]. 4 Tap [Set up the HD Camera]. 5 When prompted, press the MSETUPN button on the back 18 For assistance, visit www.panasonic.ca/english/support HNC805C_(en_en)_0902_ver.110.pdf 18 2016/09/05 13:39:11