Panasonic KX-MB3020 Multi Function Printer - Page 79
Rx Memory Full, Always, Scanner Position Error, Toner Empty, Change Supplies, Toner Low
UPC - 092281890845
View all Panasonic KX-MB3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
11. Help Display "RX MEMORY FULL" "SCANNER POSITION ERROR" "TONER EMPTY" "CHANGE SUPPLIES" "TONER LOW" "CHANGE SUPPLIES" "TRANSMIT ERROR" "TRAY #2 LEFT COVER OPEN" "WARMING UP" Cause & Solution L The memory is full of received documents due to a lack of recording paper or a recording paper jam. Load paper (page 13) or remove the jammed paper (page 89). L If the PC fax setting (feature #442 on page 62) is set to "ALWAYS", - check the connection between the computer and the unit. - check that the computer is turned ON. L If the fax preview mode (feature #448 on page 50) is set to "ON", - view, print or save the received fax documents, and then erase the unnecessary documents (page 50). - turn the setting to "OFF". The fax documents stored in memory will be printed automatically. L There is something wrong with the scanner position. Turn the power switch OFF, then ON. If the problem cannot be solved, contact our service personnel. L The toner's service life is finished. Replace the toner cartridge immediately. L The toner's service life is near to an end. Replace the toner cartridge as soon as possible. L A transmission error occurred. Try again. L The left cover of the lower input tray is open (page 74). Close it. L The inside of the unit is cold. Let the unit warm up. Wait for a while. For assistance, please visit http://www.panasonic.com/help 79