Panasonic KX MC6020 Service Manual - Page 169
Program Mode Table, ALWAYS, Stop] - scan problem
UPC - 037988840441
View all Panasonic KX MC6020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
DISPLAY MESSAGE KX-MC6020HX CAUSE AND REMEDY • The paper input tray is not installed correctly. Pull out the paper input tray and re-inset it. Note: • "#1": Standard input tray • "#2": Optional input tray • "#1+#2": Standard input tray and optional input tray • You are printing on envelopes. Check the standard input tray to be sure that envelopes are installed, then press [Black]/[Colour]. • The recording paper size is not the same as the size selected for copy. Change the recording paper size setting (feature #380 or feature #382 on Program Mode Table (P.176)), and install the appropriate recording paper. • The recording paper size is not the same as the size selected when printing from the PC. Change the recording paper size setting (feature #380 or feature #382 on Program Mode Table (P.176)), and install the appropriate recording paper. • The recording paper size is not the same as the size selected for receiving a fax. Change the recording paper size setting (feature #380 or feature #382 on Program Mode Table (P.176), and install the appropriate recording paper. • Recording paper was not fed into the unit properly. Re-insert the recording paper. Note: • "#1": Standard input tray • "#2": Optional input tray • The drum cartridge life is finished. Replace the drum cartridge immediately. Note: • The continuous use of an old drum cartridge may cause malfunction. To prevent this, when the drum life is finished, the unit will stop printing after a while, and printing will not be possible until a new drum cartridge is installed. • The drum cartridge life is near its end. Replace the drum cartridge as soon as possible. • The unit is cooling down the fuser unit. Wait for a while. • There is no space to store new items in navigator directory. Erase unnecessary items. • The color drum cartridge or the monochrome drum cartridge is not installed. Install it. • When performing scan to e-mail server, the total file size of scanned data exceeded the file size limitation. Divide the document into sections. • The unit has a document in memory. See the other displayed message instructions to print out the document. • If feature #442 is set to "ALWAYS"on Program Mode Table (P.176), - check the connection between the computer and the unit. - check the computer is turned ON. • When performing scan to FTP server, the total file size of scanned data exceeded the file size limitation. Divide the document into sections. • The front or left cover is open. Close it. • Copying has stopped due to some existing problem (example: a lack of recording paper or a recording paper jam.) See the other displayed message instructions to continue copying. • The inside of the unit is extremely cold and cannot be operated. Use the unit in a warmer area. • When performing memory transmission, the document being stored exceeded the memory capacity of the unit. Send the entire document manually. • When making a copy, the document being stored exceeded the memory capacity of the unit. Press [Stop] to clear the message. Divide the document into sections. • There is something wrong with the unit's modem. • The other party's fax machine is busy or has run out of recording paper. Try again. 169