Panasonic KX-TG985SK Operating Manual - Page 61
Setting the baby monitor, To monitor with a unit, To monitor from outside
View all Panasonic KX-TG985SK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Programming supervision. It is the caregiver's responsibility to stay close enough to handle any eventuality. Note: R If the unit is connected to a PBX system, you cannot set the baby monitor. R During the monitoring mode, battery consumption is faster than usual. We recommend leaving the monitored handset on the base unit or charger. R The monitored handset never rings while it is being monitored. If the base unit is placed near the monitored handset, we recommend turning off the base unit ringer volume (page 57). Setting the baby monitor Perform the setting operation with the handset to be monitored (for example, the handset placed in a baby's room). To monitor with a unit The internal baby monitor feature is available: - between handsets - between a handset and the base unit Handset 1 MMENUN#268 2 MbN: "On" a MSELECTN 3 MbN: Select the desired unit's number to monitor with. a MSAVEN R "Baby monitor" will be displayed. R The registered unit's name/number is displayed. Note: R When this feature is on, another handset or the base unit can hear the monitored handset by making an intercom call. To monitor from outside If you enable this feature, the unit will call a pre-programmed phone number when the handset detects sound. After you answer the call, you can listen in on the room where the handset is located. This feature is only available for landline. Handset n From the phonebook: 1 MMENUN#268 2 MbN: "On" a MSELECTN 3 MbN: Select "Outgoing call" to monitor from outside. a MADDN 4 MbN: "Phonebook" a MSELECTN 5 MbN: Select the phonebook entry. a MSAVEN R "Baby monitor" will be displayed. Note: R If you edit a phonebook entry which is assigned for monitoring, the edited entry does not transfer to the monitor. n By entering phone numbers: 1 MMENUN#268 2 MbN: "On" a MSELECTN 3 MbN: Select "Outgoing call" to monitor from outside. a MADDN 4 MbN: "Manual" a MSELECTN 5 Enter the desired name. a MOKN 6 Enter the desired number. a MOKN a MSELECTN R "Baby monitor" will be displayed. Note: R The registered name/number is displayed. Turning off the baby monitor The monitored handset cannot be used while baby monitor is set to "On". Handset 1 Press MMENUN on the handset being monitored. 2 MbN: "On/Off" a MSELECTN 3 MbN: "Off" a MSELECTN a MOFFN Editing an outside monitoring number Handset 1 Press MMENUN on the handset being monitored. For assistance, please visit http://shop.panasonic.com/support 61