Panasonic KX-TG985SK Operating Manual - Page 62
Other programming, Answering the baby monitor, Changing the handset name
View all Panasonic KX-TG985SK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Programming 2 MbN: "On/Off" a MSELECTN 3 MbN: "On" a MSELECTN 4 MbN: Select the outside line. 5 MMENUN a MbN: "Edit" a MSELECTN 6 Edit the name if necessary. a MOKN 7 Edit the phone number if necessary. a MOKN a MSELECTN Erasing an outside monitoring number Handset 1 Press MMENUN on the handset being monitored. 2 MbN: "On/Off" a MSELECTN 3 MbN: "On" a MSELECTN 4 MbN: Select the outside line. 5 MMENUN a MbN: "Erase" a MSELECTN 6 MbN: "Yes" a MSELECTN a MOFFN R The monitoring unit will answer calls automatically when the auto intercom feature is set to "On" (page 36). Note: R If you receive an outside call when communicating with the monitored handset, the interrupt tone sounds. - To answer the call with the handset, press MOFFN, then press M N. - To answer the call with the base unit, press MZN 3 times.*1 *1 If MMUTEN is pressed, press MZN 2 times. n When monitoring from outside: Answer the call. If you want to respond from your monitoring phone, press #1 using tone dialing. You can turn off the baby monitor feature by pressing #0. Note: R The unit disconnects the call automatically after 2 minutes. Baby monitor sensitivity You can adjust the sensitivity of the baby monitor. Increase or decrease the sensitivity to adjust the sound level needed to trigger the baby monitor feature. R This feature cannot be set during a monitoring call. Handset 1 Press MMENUN on the handset being monitored. 2 MbN: "Sensitivity level" a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MOFFN Answering the baby monitor n When monitoring with a unit: Handset: Press M N to answer a call. Base unit: Press MZN to answer a call. If you want to respond from the monitoring unit, press MMUTEN. Other programming Changing the handset name The default handset name is "Handset 1" to "Handset 6". You can customize the name of each handset ("Bob", "Kitchen", etc.). This is useful when you make intercom calls between handsets. To display the handset name in standby mode, turn on the handset name display feature (page 62). Handset 1 MMENUN#104 2 Enter the desired name (10 characters max.). a MSAVEN a MOFFN Displaying the handset name You can select whether or not the handset name is displayed in standby mode. The default setting is "Off". 62 For assistance, please visit http://shop.panasonic.com/support