Panasonic KX-TGF344B KX-TGF34x Owner's Manual - Page 21

Call Block Using the MCALL BLOCKN button You can press the MCALL BLOCKN button in the following situations to disconnect the current call and add a phone number to the call block list: - when an incoming call is being received - when an incoming call is being recorded by the answering system - when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. Handset / Base unit 1 Press MCALL BLOCKN under the situations shown above. 2 Confirm the call block number and press MYESN. R The call block number is stored in the call block list, "Caller blocked" is displayed, and then the call is disconnected. Note: R If the call has no phone number, the call is blocked but it is not stored in the call block list. R The call block feature is not available for intercom calls or calls received by call waiting. R Blocked calls are logged in the caller list. Storing unwanted callers The unit can block calls by storing the desired items in the call block list beforehand (Caller ID subscribers only). - "Block a single number"*1/"Block a single #"*2: The unit blocks calls from specific phone numbers stored in the call block list. - "Block range of numbers"*1/"Block range of #"*2: The unit blocks calls that begin with a number stored in the call block list, such as a toll-free phone number prefix or certain area codes. - "Block unknown CID"*1/"Block unknown"*2: The unit blocks calls that have no phone number. *1 Handset *2 Base unit Single phone numbers and ranges of numbers can be stored in the call block list up to 250 items in total. Blocking unwanted callers: When a call is received, the unit rings briefly*1 while caller information is being received. If the caller's phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call. *1 If you do not want this one ring to sound, select "No" in "Setting not to ring once for blocked call" (page 22). Storing a single phone number Important: R We recommend storing 10 digits (including the area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked. Adding call blocked numbers from the caller list Handset 1 MCN CID 2 MbN: Select the entry to be blocked. R To edit the number: MMENUN a MbN: "Edit" a MSELECTN Press MEDITN repeatedly until the phone number is shown in the 10-digit format. a MSAVEN a MbN: "Call block" a MSELECTN a Go to step 4. 3 MCALL BLOCKN 4 MbN: "Yes" a MSELECTN 5 Edit the phone number if necessary (24 digits max.). 6 MSAVEN a MOFFN For assistance, please visit www.panasonic.com/support 21 TGF34x_en_1201_ver043.pdf 21 2014/12/01 16:22:18