Panasonic KX-TS620B One Line Phn W/tam-l - Page 19

Preparing the Answering System Number of Rings You can select the number of times the unit rings before the answering system answers a call, from "2" to "7" or "Toll saver*". Your phone default setting is "4". Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. 1 Press {FUNCTION/EDIT}. 2 Scroll to "Set answering ?" by pressing {4} or {3}, then press {OK} (Yes key). 3 Scroll to "Number of rings?" by pressing {4} or {3}. 6 Press {OK} (Save key). • A long beep sounds. • The display will return to step 3. To exit the programming mode, press {EXIT} or wait for 60 seconds. • You can exit the programming mode any time by pressing {EXIT}. * Toll Saver When you call the unit from a touch tone telephone: If the unit answers on the 2nd ring, there is at least one new message. If the unit answers on the 4th ring, there are no new messages. Hang up when you hear the 3rd ring. This will save you the toll charge for the call. 4 Press {OK} (Yes key). • The current setting is displayed. Number of rings :4  [OK]=Save 5 Select the number of rings by pressing {4} or {3}. • You can also select the number of rings by pressing dialing buttons {2} to {7} or {0} (Toll saver*). For assistance, please visit http://www.panasonic.com/phonehelp 19