Panasonic KX-TS620B One Line Phn W/tam-l - Page 36

Direct Dial (M1, M2, M3) Storing Names and Numbers in the Direct Dial memory You can store up to 3 names and phone numbers in the memory. Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. 1 Press {FUNCTION/EDIT}. 2 Scroll to "Save M1,M2,M3 ?" by pressing {4} or {3} and press {OK} (Yes key). 3 Enter a name, up to 15 characters with the dialing buttons {0} to {9}, {£} and {#} (p. 32). • To move the cursor, press {:} or {9}. • If a name is not required, go to step 4. 4 Press {OK} (Next key). 5 Enter a phone number up to 32 digits. • If you enter a wrong number, press {ERASE} and enter the correct number. • To erase all of the digits, press and hold {ERASE}. • If you want to change the storing name, press {3} to reach the desired display. 123456789  M1,M2,M3=Save 6 Press one of the Direct Dial button ({M1}, {M2} or {M3}) (Save key). (Example: {M1} is pressed.) • A long beep sounds. • The entered name and phone number are displayed. • After a few seconds, the display will return to step 2. To exit the programming mode, press {EXIT} or wait for 60 seconds. • When using the Call Restriction feature (p. 42), you cannot store a phone number in the Direct Dial memory ({M1}, {M2} or {M3}). If the Direct Dial button selected manually is occupied, the display will be shown as below. To overwrite, press {OK} (Yes key). M1 is occupied Overwrite ? []=No [OK]=Yes To select the other empty Direct Dial memory, press {3} (No key) and press an empty Direct Dial button ({M1}, {M2} or {M3}). • A long beep sounds. • The display will return to step 2. To exit the programming mode, press {EXIT} or wait for 60 seconds. • To continue storing other items, repeat from step 2. When using Call Restriction (p. 42), you may want to program emergency number in Direct Dial memory ({M1}, {M2} or {M3}). 36 For assistance, please visit http://www.panasonic.com/phonehelp