Panasonic KX-TS620B One Line Phn W/tam-l - Page 37
Dialing A Stored Number From The Direct Dial Memory
UPC - 037988476404
View all Panasonic KX-TS620B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Direct Dial (M1, M2, M3) To erase a stored number 1 Press the required Direct Dial button ({M1}, {M2} or {M3}). 2 Press {ERASE}. • To stop erasing, press {3} (No key). 3 Press {OK} (Yes key). • A long beep sounds, the information is erased, then "Memory Empty" is displayed. • To exit the programming mode, press {EXIT} or wait for 60 seconds. • When using the Call Restriction feature (p. 42), you cannot erase a phone number in the Direct Dial memory ({M1}, {M2} or {M3}). • If a pause is required for dialing, press {PAUSE} where needed. If required, you can also store {FLASH} in a phone number. Pressing {PAUSE} or {FLASH} counts as one digit (p. 38, 40). Dialing a Stored Number from the Direct Dial memory 1 Lift the handset or press {SP-PHONE/HEADSET}. 2 Press the required Direct Dial button ({M1}, {M2} or {M3}). • The stored number is displayed and dialed. OR 1 Press the required Direct Dial button ({M1}, {M2} or {M3}). • The stored number is displayed. 2 Lift the handset or press {SP-PHONE/HEADSET}. • When you press the Direct Dial buttons continuously, confirm that the first dialing out have complete, then press the next button. • You can dial numbers stored in the Direct Dial memory ({M1}, {M2} or {M3}) even if the Call Restriction feature (p. 42) is set. For assistance, please visit http://www.panasonic.com/phonehelp 37