Panasonic KX-TS620B One Line Phn W/tam-l - Page 29
STORING CALLER LIST INFORMATION IN THE DIRECT DIAL MEMORY, If the Direct Dial button
UPC - 037988476404
View all Panasonic KX-TS620B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Caller ID Service Storing Caller List Information in the Direct Dial memory You can store numbers in the Caller List to the Direct Dial memory ({M1}, {M2} and {M3}). Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. 1 Press {4} or {3} to enter the Caller List. 2 Scroll to the caller you want to store in the Direct Dial memory by pressing {4} or {3}. 3 Press {FUNCTION/EDIT}. • If the number requires editing, see page 27. 444-7777 [OK]= Next 4 Press {OK} (Next key). If there is name information for the caller, "Enter name" and caller's name will be displayed. You can edit name information. Enter name S MITH,JACK [OK]= Next a) If you need to change the name, enter the name (p. 32). When finished, press {OK} (Next key). b) If you do not need to change the name press {OK} (Next key). If there is no name information for the caller "Enter name" will be displayed. a) If a name is required, enter the name (p. 32). When finished, press {OK} (Next key). b) If a name is not required, press {OK} (Next key). >Save phonebook Save M1,M2,M3 [OK]= Save 5 Press {4}. 6 Press one of the Direct Dial button ({M1}, {M2} or {M3}) (Save key). (Example: {M1} is pressed.) If the Direct Dial button selected is occupied, the display will be shown as below. M1 is occupied Overwrite ? []=No [OK]=Yes To overwrite, press {OK} (Yes key). To select the other empty Direct Dial memory, press {3} (No key) and press an empty Direct Dial button ({M1}, {M2} or {M3}). • A long beep sounds. • The display will return to Caller List. You can continue storing other items. To exit the programming mode, press {EXIT} or wait for 60 seconds. • To erase other stored items from the Direct Dial memory see page 37. • To cancel during programming, press {EXIT}. Start again from step 1. • You cannot store caller information in the Direct Dial memory if a phone number is not displayed. For assistance, please visit http://www.panasonic.com/phonehelp 29