Panasonic KXFPC96 KXFPC95 User Guide - Page 83
Basic features, Programming table
View all Panasonic KXFPC96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Basic features! Features Summary Programming table Code Display & Feature Settings How the unit operates SET1DATE1&1TIME #01 To set the date and time #02 YOUR1LOGO To set your logo mm/dd/yy hh:mm (2 digits for each entry) (Up to 30 characters) See page 15 for details. See pages 16 and 17 for details. YOUR1FAX1NO. #03 To set your facsimile telephone number SENDING1REPORT #04 To print and check the sending report for fax transmission results (Up to 20 digits) ERROR ON OFF See page 18 for details. "ERROR": The sending report will be printed only when fax transmission fails (p. 52). "ON": The sending report will be printed after every transmission. TAD1RING1COUNT To change the number of rings before the unit answers a call in the TAD/FAX mode #06 FAX1RING1COUNT To change the number of rings before the unit answers a call in the FAX ONLY mode 1, 2, 3, 4 This setting is also available after activating the TAD/FAX mode. TOLL SAVER See page 68 for details. RINGER OFF 1, 2, 3, 4 This setting is also available after activating the FAX ONLY mode (p. 61). RECORDING1TIME VOX #10 To change the recording time for an incoming message 1 MIN "VOX": Unlimited "1 MIN": Up to 1 minute REMOTE1TAD1ID #11 To operate the answering device from a remote location ID = 111 DIALING1MODE #13 If you cannot dial, change the setting depending on your telephone line service. TONE PULSE 1. Follow steps 1-3 on page 82. 2. Enter any 3-digit number except a number using 0 or 7. 3. Press SET . 4. Press MENU . "TONE": For tone dial service. "PULSE": For rotary pulse dial service. (The default setting is in bold type.) 83