Panasonic PT AE2000U Lcd Projector - Page 22
Remote control operation, Operating range, Turning on the button backlight - manual
UPC - 791871111536
View all Panasonic PT AE2000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Remote control operation Operating range You can operate the projector with the remote control within the remote range 7 m (22'11"). Q Facing to the projector Ensure the remote control emitter is facing to the remote control signal receptor on front/back of the projector and press the required buttons to operate. Q Facing to the screen Ensure the remote control emitter is facing to the screen and press the required buttons to operate the projector. The signal will be reflected off the screen. The operating range may differ due to the screen material. This function may not be effective with a translucent screen. NOTE: • Do not let strong light shine onto the signal receptor. The remote control may malfunction under strong light such as fluorescent. • If there are any obstacles between the remote control and the remote control signal receptor, the remote control may not operate correctly. Turning on the button backlight In a dark room, you can turn on the button backlight to operate the remote control. Press the LIGHT button on the upper right corner of the unit to turn on the backlight and enter the light-on mode. After 30 seconds without any operation, the backlight will go out and press any but the LIGHT button to turn on again. To escape from the light-on mode, press the LIGHT button. Resetting to the factory default settings You can reset most of the customized settings to the factory defaults by pressing DEFAULT button of the remote control. Display the required sub-menu or the menu items and press the button again. NOTE: • Some menu items are not available to reset by pressing the DEFAULT button. Adjust each menu items manually. Capturing an image When projecting an image, press FREEZE button to capture the projected image and display it on the screen as a still picture. Press again to escape. You can adjust AREA SELECT of the SPLIT ADJUST menu by pressing the ENTER button while the frozen image is displayed. See "SPLIT ADJUST" on page 32. Basic Operation 22 - ENGLISH