Panasonic PT AE2000U Lcd Projector - Page 32

PICTURE menu COLOR TEMPERATURE You can adjust the white balance of the projected image. Less bluish More bluish Setting range: -6 to +6 DYNAMIC IRIS You can switch automatic adjustment of the lamp and the lens iris on/off. ON: Automatic adjustment OFF: No adjustment J AUTO ADJUST You can switch on/off the automatic adjustment system in each items. Items Default setting BLACK LEVEL ADJUST ON WHITE LEVEL ADJUST ON RGB ADJUST (BLACK) OFF RGB ADJUST (WHITE) OFF 1. Press F G and select the required item. 2. Press I H and switch on/off. 3. Press F G and select AUTO and press ENTER. The confirmation screen will be displayed. 4. Press I H and select OK. 5. Press ENTER. WAVEFORM MONITOR You can monitor whether or not the luminance level of the input signal is in the recommended range by displaying it in the waveform monitor. If the waveform is not in the range, adjust it for the best quality. See "Adjusting the signal condition with a waveform" on page 24. OFF FULL SCAN(Y) FULL SCAN(R) FULL SCAN(G) FULL SCAN(B) SINGLE LINE SCAN(Y) SINGLE LINE SCAN(R) SINGLE LINE SCAN(G) SINGLE LINE SCAN(B) MONITOR POSITION AUTO ADJUST UPPER LEFT 1. Press F G to move to the required waveform style. 2. Press ENTER to select. The WAVEFORM MONITOR will be displayed. See "Adjusting the signal condition with a waveform" on page 24. J MONITOR POSITION When the FULL SCAN is selected, press F G I H to adjust the position of the monitor. See "Adjusting the signal condition with a waveform" on page 24. NOTE: • When the WAVEFORM MONITOR is set to OFF, the AUTO ADJUST is not displayed. SPLIT ADJUST You can perform image adjustment in some PICTURE menu items while displaying a certain area of the frozen image in a split window. Q SPLIT ADJUST MODE Select the required split style from NORMAL and REVERSE in the SPLIT ADJUST MODE menu. NORMAL REVERSE Settings 32 - ENGLISH