Panasonic PT AE2000U Lcd Projector - Page 49
Technical Information, Communication settings, Control commands, ENGLISH - 49
UPC - 791871111536
View all Panasonic PT AE2000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
J Communication settings Signal level RS-232C Sync. method Asynchronous Baud rate 9 600 bps Parity None J Control commands Technical Information Character length Stop bit X parameter S parameter 8 bits 1 bit None None Command PON POF IIS OMN OEN OBK OCU/OCD/ OCL/OCR OLE OST OFZ OOT OSH OVM OWM VS1 VPM Control contents POWER ON POWER OFF INPUT MAIN Remarks In standby mode, all commands other than the PON command are ignored. The PON command is ignored during lamp ON control. If a PON command is received while the cooling fan is operating after the lamp has switched off, the lamp is not turned back on again straight away in order to protect the lamp. Parameter: CP1 = COMPONENT1 IN SVD = S-VIDEO IN HD1 = HDMI1 IN HD3 = HDMI3 IN CP2 = COMPONENT2 IN VID = VIDEO IN HD2 = HDMI2 IN RG1 = COMPUTER IN Displaying the main menu. ENTER Activating the selected items in the menu mode. RETURN Returning to the previous menu or escaping from the menu mode. Navigation buttons OCU = F button OCD = G button OCL = I button OCR = H button LENS Activating the LENS CONTROL menu. DEFAULT FREEZE SLEEP BLANK PICTURE WAVEFORM ASPECT PICTURE MODE Resetting to the factory default setting. (page 22) Freezing the projected screen. Parameter: 0 = OFF 1 = ON Setting the duration of time to turn off the power automatically. (page 25) 0 = OFF 1 = 60min. 2 = 90min. 3 = 120min. 5 = 180min. 6 = 210min. 7 = 240min. Turning off the projection temporarily. Send the command to switch between ON and OFF. Do not send the command consecutively. 4 = 150min. Activating the PICTURE menu. Send the command to switch menu items. (page 25) Activating the WAVEFORM. Parameter: 0 = OFF 1 = FULL SCAN (Y) 2 = FULL SCAN (R) 3 = FULL SCAN (G) 4 = FULL SCAN (B) (page 24) 5 = SINGLE LINE SCAN (Y) 6 = SINGLE LINE SCAN (R) 7 = SINGLE LINE SCAN (G) 8 = SINGLE LINE SCAN (B) Switching the aspect ratio. (page 23) Switching the PICTURE MODE. (page 25) Parameter: NOR = NORMAL DYN = DYNAMIC CL1 = COLOR1 CL2 = COLOR2 CN1 = CINEMA1 CN2 = CINEMA2 CN3 = CINEMA3 Appendix ENGLISH - 49