Panasonic PT AE2000U Lcd Projector - Page 39

LENS CONTROL Remote control Control panel FUNCTION BUTTON Remote control Control panel See "Navigating through the MENU" on page 30. See "Main menu and sub-menu" on page 28. See "Navigating through the MENU" on page 30. See "Main menu and sub-menu" on page 28. ZOOM/FOCUS You can use the 2 different test patterns to adjust the focus and zoom of the image. See "Lens shift and positioning" on page 16. 1. Press ENTER to display test pattern 1. Press F G to adjust the focus and I H to adjust the zoom. BUTTON1/2/3 You can assign certain menu options to the 3 function buttons for instant operation. 1. Select the required button from BUTTON1, BUTTON2 or BUTTON3 and press the ENTER button. 2. Press F G I H to select the required menu options and press the ENTER button. RETURN ENTER FOCUS ZOOM 2. Press ENTER to display test pattern 2. Press F G to adjust the focus and I H to adjust the zoom. RETURN ENTER FOCUS ZOOM 3. Press ENTER to display the projected image. You can confirm the adjustment is fit to the projected image. 4. Press MENU or RETURN to return to the previous menu, or press repeatedly to escape the menu mode. NOTE: • When the projector and/or the screen is tilted, adjust the focus at the center of the image. The upper and lower edge might be out of focus. • When the image is distorted in keystone, adjust the KEYSTONE in POSITION menu. HDMI 1 IN NORMAL HDMI 2 IN DYNAMIC HDMI 3 IN COLOR1 COMPUTER IN COLOR2 COMPONENT 1 IN CINEMA1 COMPONENT 2 IN CINEMA2 S-VIDEO IN CINEMA3 VIDEO IN SPLIT ADJUST BLANK WAVEFORM AUTO ADJUST AUTO SETUP MEMORY LOAD CONTRAST BRIGHTNESS CONTRAST R BRIGHTNESS R CONTRAST G BRIGHTNESS G CONTRAST B BRIGHTNESS B Q BLANK function You can stop the projection temporary for electrical power save. Press any button except the LIGHT and learning remote control buttons. Settings ENGLISH - 39