Panasonic PT60DL54J PT50DL54 User Guide - Page 14

ENGLISH OPTIONAL EQUIPMENT CONNECTIONS HDMI (High Definition Multimedia Interface) Input Connection About HDMI HDMI is the first all-digital consumer electronics A/V interface that supports several uncompressed standards, enhanced and high definition video formats as well as existing multi-channel audio format. One jack supports both video and audio information. The HDMI/HDCP1 input can be connected to an EIA/CEA 8612 compliant consumer electronic device, such as a set top box or DVD player equipped with an HDMI or DVI output connection. By inputting a HDCP high definition picture source to the HDMI terminal of this Projection Television, high definition pictures can be displayed on the screen in their digital form. The HDMI input terminal is not intended to be used with personal computers. This Projection Television is compatible with 1080i, 720p, 480p and 480i formats. Select the output of the connecting device to match that of the Projection Television. Notes: 1. 2. HDMI/HDCP = High Definition Multimedia Interface / High-Bandwidth Digital Copy Protection. EIA/CEA-861 = Compliance covers profiles for transmission of uncompressed digital video including high bandwidth digital content protection. Compatible formats This Projection Television is compatible with the following formats. Please set the connecting device to the following format. Video signal Format No. of pixels Vertical scanning frequency (Hz) 1080i 1920 x 1080i 59.94 / 60 720p 1280 x 720p 59.94 / 60 480p 720 x 480p 640 x 480p 59.94 / 60 59.94 / 60 480i 720 x 480i 59.94 / 60 Audio signal When digital audio is included in the HDMI connection, the compatible sampling frequencies are 48 KHz / 44.1KHz / 32 KHz. Connection diagram Follow the diagram below to connect the Projection Television to a set top box or a DVD player. EXTERNAL DIGITAL COMPONENT AUDIO OUT R L HDMI OUT Note: Use anolog audio when no digital audio is available. CABLES NOT INCLUDED ANT Incoming Cable AUDIO IN RGB 1 IN R-AUDIO IN-L HDMI AV IN IN 1 IN 2 OUT IN 1 IN 2 IN 3 Y Y Y S-VIDEO PB PB PB VIDEO VIDEO PR PR PR L AUDIO R L L L L AUDIO R R R R COMPONENT VIDEO INPUT TERMINALS ON BACK OF TELEVISION * The connector on the Projection Television is HDMI Type A connector. Procedure • Connect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the Projection Television. • Press TV/VIDEO button on the remote control to select HDMI input. The interface on the Projection Television is an HDMI Type A connector. • If the external device has a DVI output only, use a DVI to HDMI adaptor cable*3 to connect to the HDMI jack on the Projection Television. Also, connect the Audio Out signal from the external device (set top box or DVD player) to the Audio In*4 jacks below the HDMI input. • If you cannot display the picture because your Digital Set Top Box does not have a Digital Out terminal setting, use the Component Video Input (or the S-Video Input or Video Input). In this case, the picture will be displayed as an analog signal. Notes: *3. HDMI-DVI conversion cable (TY-SCH03DH) available on Panasonic Website: www.panasonic.com (for USA only). *4. Please refer to page 22 for Audio setting detail. 12 z