Panasonic PVDR2714 PVDR2714 User Guide - Page 33
Index Search, Audio Mode for Playback, Zero Search, Press CM/ZERO in Stop mode to start ZERO
View all Panasonic PVDR2714 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
VCR Operation Zero Search To quickly return to a specific tape counter location. 1 Press COUNTER RESET during playback to display the Counter. 2 While (counter is displayed), Press COUNTER RESET at the desired position to reset to "0:00.00." 0:00.00 3 Continue to record, playback etc. 4 Press STOP. 5 Press CM/ZERO in Stop mode to start ZERO SEARCH. • Unit will go into FF or REW mode and stops at the last point the Counter was set to 0:00.00. Index Search Search System is ... Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are made, program index and information are also included. These index marks can be used to access or scan recordings. Go directly to the desired recording. 1 Press SEARCH in Playback or Stop mode to display INDEX SEARCH screen, and then press NUMBER keys to select the recording number. INDEX SEARCH ENTER INDEX NUMBER :1 USING 1-9 KEYS FORWARD SEARCH :FF REVERSE SEARCH :REW EXIT :RETURN 2 Press FF or REW to start search. Example 1: To go to rec. 2 from rec. 4, enter 3 and press REW. 1 2 3 45 6 7 Example 2: To go to rec. 6 from rec. 2, enter 4 and press FF. 1 2 3 45 6 7 NOTE: Ļ indicates start points of each recording. Note: • If Index Search is started very close to an index mark, that index mark may not be counted in the search. Audio Mode for Playback Choose the type of sound track for playback. 1 See the "Playback a Tape" section on page 32 to playback the tape. 3 Play begins at search end. To search forward or back 1 index, press FF or REW while screen below is displayed (10 seconds). INDEX SEARCH 2 Press AUDIO repeatedly (each press within 5 seconds) to select desired mode. • Select "HIFI (L/R)," to listen to a regular Hi Fi Stereo recording. Select "HIFI (L)" or "HIFI (R)" to listen only to the left or right channel of a stereo recording. This is commonly used for Karaoke, music on one channel and vocal on the other. Select "NORMAL" for linear stereo playback from a recorded tape with Hi Fi disabled. • This screen appears when you press AUDIO during playback. To cancel, press STOP. FORWARD SEARCH :FF REVERSE SEARCH :REW HIFI(L/R) HIFI(L) HIFI(R) NORMAL 33