Panasonic RXEX1 RXEX1 User Guide - Page 15

Cassettes Press [POWER, ] to turn the unit on. Insert a cassette into the deck. Play starts from the side facing up. Press [3 TAPE] to start play. Turn [- "VOLUME#+ ] to adjust the volume. Listening PLAY 1 PGM RE FADER SLEEP REC RANDOM Tape Counter EQ ON ALL1-REC ST MONO Tape Playing PLAY 1 PGM RE FADER SLEEP REC RANDOM EQ ON ALL1-REC ST MONO Present state (e.g., elapsed play time of CD) Present time PLAY 1 PGM RE FADER SLEEP REC RANDOM Tape counter PLAY 1 PGM RE FADER SLEEP REC RANDOM PLAY 1 PGM RE FADER SLEEP REC RANDOM EQ ON ALL1-REC ST MONO EQ ON ALL1-REC ST MONO EQ ON ALL1-REC ST MONO Recording To stop play Press [7 TAPE/CD]. To eject tape Stop tape play, then press [0 TAPE]. One touch play (When using AC power) When a cassette is loaded, press [3 TAPE]. The unit comes on and play starts. Fast-forward and rewind Press [REW/-/ ] (rewind) or [ /+/FF] (fast-forward). Selection of tapes Use normal position tapes to play correctly. High position and metal position tapes can be played, but the unit will not be able to do full justice to the characteristics of these tapes. Cassette tape care • Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. • Tape slack can get caught up in the mechanism and should be taken up before the tape is played. • Endless tapes can get caught up in the deck's moving parts if used incorrectly. Before Recording Use household AC power or new batteries when recording, to avoid poor recording caused by the batteries running down. Television can cause interference to recording made on this unit if the two are too close to each others. Selection of tapes for recording Use normal position tapes. High position and metal position tapes can be used, but the unit will not be able to record or erase them correctly. Volume and sound quality in recording • Recording level is set automatically. • Recording are unaffected by changes to sound quality. To display the tape counter while recording Remote control only Press [DISPLAY]. Each time you press the button in the CD or radio mode: To reset the tape counter Press [C-RESET]. The counter resets to "000". 15 RQT5671