Panasonic RXEX1 RXEX1 User Guide - Page 17
Recording, Recording CDs, Press, TAPE/CD] to switch to CD mode.
View all Panasonic RXEX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
PLAY 1 PGM RE FADER SLEEP REC RANDOM EQ ON ALL1-REC ST MONO PLAY 1 PGM RE FADER SLEEP REC RANDOM EQ ON ALL1-REC ST MONO PLAY 1 PGM RE FADER SLEEP REC RANDOM EQ ON ALL1-REC ST MONO PLAY 1 PGM RE FADER SLEEP REC RANDOM EQ ON ALL1-REC ST MONO Recording CDs You can record the whole CD (ALL-REC) or a selected track(1-REC). ALL-REC Preparation: Insert a CD ( page 10) Press [9 TAPE/CD] to switch to CD mode. Press [CD REC MODE] so "ALL-REC" is displayed. Each time the button is pressed ALL-REC 1-REC OFF The display shows the length of tape needed. "C indicates the tape needed exceeds 100 minutes. You can still record, but some tracks may not be recorded if the tape isn't long enough. Insert a cassette with the side for recording facing up. Press [ ] to start recording. The unit rewinds the tape, records 10 seconds of silence, and then starts recording. To stop recording Press [ TAPE/CD]. The CD also stops. If a track is interrupted at the end of the side facing up Recording and CD pauses. To record the track again on the opposite side 1. Press [0 TAPE], flip the cassette, and insert it. 2. Press [ ]. The unit records 10-second of silence, and resumes recording from the beginning of the cut-off track. To record selected tracks Program tracks ( steps and on page 12). Do steps to above. Recording You cannot use ALL-REC with repeat or random play ( page 11). 1-REC Preparation: Insert a CD ( page 10) and a cassette. Wind the tape to where you want to start recording. Press [ TAPE/CD] to switch to CD mode. Press [CD REC MODE] so "1-REC" is displayed. Press [REW/-/ ] or [ /+/FF] to select the track you want to record. Press [ ] to start recording. CD play and recording start at the same time. To stop recording Press [ TAPE/CD]. The CD also stops. To record a track in play Press [CD REC MODE] to display "1-REC". Press [ ]. Recording starts from the beginning of the track and stops when the track finishes. Recording and CD will stop when the tape reaches its end, even if the track has not finished. 17 RQT5671