Panasonic RXEX1 RXEX1 User Guide - Page 20
THE SLEEP TIMER, THE TIMER FADER, Timer, Using the Timer
View all Panasonic RXEX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Timer 20 RQT5671 Y PLAY 1 PGM RE FADER SLEEP REC RANDOM EQ ON ALL1-REC ST MONO Y PLAY 1 PGM RE FADER SLEEP REC RANDOM EQ ON ALL1-REC ST MONO Using the Timer To check the settings (when unit is off) Press [CLOCK/TIMER]. The settings are shown in the following order: Start time, Finish time Source Volume Clock To change the settings (when unit is on) To change the times Do steps , , , and . To change the source or volume 1. Press [ PLAY/REC] to clear the timer indicator. 2. Make changes to the source or volume. 3. Do steps to . You can enjoy other sources after you have set the timer. Turn the unit off before the timer's start time. The play and record timers cannot be used together. The Sleep Timer Remote control only Set the unit to stop and turn off after a certain time. While listening to a CD, a cassette, or the radio. Press [SLEEP] to select the time (in minutes). Each time the button is pressed SLEEP 30 SLEEP 60 SLEEP 90 SLEEP OFF SLEEP 120 To cancel Press [SLEEP] to select "SLEEP OFF". To check the remaining time Press [SLEEP] once. The remaining time is shown for about 5 seconds. To change the time. Press [SLEEP] to select the new time. The sleep timer can be used in combination with the play and record timers. Make sure the unit is off before the play or record timer's set start time. The Timer Fader Remote control only Volume increases slowly to the set level when a timer turns the unit on and decreases slowly when the sleep timer turns the unit off. Press [TIMER FADER] to display " ". (All timers will be affected.) Press again to cancel. This feature does not affect record timer's recordings.