Panasonic SC-ZT2s Operating Instructions - Page 10
Connecting STB etc., Setting for automatically switching the input source to STB
View all Panasonic SC-ZT2s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Home Theater connections Basic connections Connecting STB etc. Use this connection to enjoy STB multi-channel sources on this system. Digital audio out (optical) HDMI input TV HDMI IN HDMI cable Main unit Make sure to connect to TO TV (ARC) . Connection STB etc. HDMI OUT Digital audio out (optical) HDMI Video/ Blu-ray Disc player/ Audio out DVD recorder, etc. Home Theater connections Setting for automatically switching the input source to STB When you make the above connection and you use the Panasonic TV (VIERA), you can automatically switch this system's input by switching the input source of the TV (VIERA) to STB in the following procedure. Preparation: Make sure that this system has been turned on. (➜ page 16) To return to the previous display/To cancel during setting operation in steps 2 to 5: Press [ RETURN]. 1. Switch the input source of TV (VIERA) with the above connection and show STB pictures. 2. Press and hold [-SETUP, OFF] for about 2 seconds. The setting items are displayed. (➜ page 21) 3. Press [w][q] to select "STB AUDIO " and press [OK]. 4. Press [e][r] to select "SET " and press [OK]. SET : The setting is automatically switched to "AUX2 / STB ". OFF : The setting is not automatically switched to "AUX2 / STB ". (factory setting) 5. Press [ RETURN] several times to select "EXIT " and press [OK] to finish the setting. Note • "STB AUDIO " in step 3 is displayed only when the unit is connected to the Panasonic TV (VIERA). Also, this is not displayed when the step 1 operation is not performed. • If you change the connection after setting, select "OFF " once and "SET " again. • When you select "EXIT " and press [OK] in step 3, the setting mode finishes. Connecting cables to audio terminals (DVD player, etc.) • Refer to the operating instructions for the equipment you are connecting for the correct type of video cable. TV Audio out Main unit L R DVD player etc. VIDEO IN AUDIO IN Video cable (A) Audio cable (B) VIDEO OUT AUDIO OUT 10 VQT2R70 A: Connect the video cable directly from the other equipment to the television. B: Use this connection so audio from the equipment can be heard through the television speakers even if this system is in Standby mode. Reduce the volume on the television and select "TV " after you have made connections as above if you want to use this system.