Panasonic SC-ZT2s Operating Instructions - Page 7

Control guide/Remote control preparation Before use Remote control Standby/ON button (➜ page 16) Test signal output (➜ pages 14, 21) For using "WHISPER-MODE SURROUND" (➜ page 20) For using "GAME" (➜ page 20) Input mode and remote control code buttons (➜ pages 16, 24) For adjusting speaker output (➜ pages 20, 21) For adjusting the volume (➜ page 16) Muting (➜ page 20) For entering setup mode (➜ pages 10, 15, 21 to 24) For adjusting/activating settings (➜ pages 10, 15, 21 to 24) For returning to the previous menu (➜ pages 10, 15, 21 to 24) For selecting or canceling Dolby Virtual Speaker, Dolby Pro Logic and SFC mode (➜ page 17) Note For remote control buttons used for speaker setting, see pages 13 to 15. Remote control preparation Inserting the batteries Press on the tab to open. (R6/LR6, AA) Insert so the poles (( and )) match those in the remote control. Use manganese batteries or alkaline batteries. • Do not mix old and new batteries. • Do not use different types of batteries at the same time. • Do not take apart or short circuit. • Do not attempt to recharge alkaline or manganese batteries. • Do not use batteries if the covering has been peeled off. • Do not heat or expose to flame. • Do not leave the batteries in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control. Remove the batteries if the remote control is not going to be used for a long period of time. Store them in a cool, dark place. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. Using the remote control Main unit Remote control signal sensor Transmission window Approx. Approx. 30º 30º Within 7 meters (23 feet) at the front (The remote controlling range varies according to the angle) Note • Do not place an object between the signal sensor and the remote control. • Do not expose the signal sensor to direct sunlight or strong light of a fluorescent lamp. • Keep the transmission window and the system's sensor free from dust. 7 VQT2R70