Panasonic SC-ZT2s Operating Instructions - Page 23

Functions and settings VIERA Link "HDAVI Control" setting When you do not wish to use VIERA Link "HDAVI Control" (➜ page 18), you can set the unlinked operation by selecting "OFF ". The normal setting is "ON " (Linked operation). 1. Press and hold [-SETUP, OFF] for about 2 seconds. The setting items are displayed. (➜ page 21) 2. Press [w][q] to select "HDMI " and press [OK]. 3. Press [w][q] to select "CTRL " and press [OK]. 4. Press [e][r] to select "ON " or "OFF " and press [OK]. ON : When the operation is linked OFF : When the operation is not linked Factory setting: ON 5. Press [ RETURN] several times to select "EXIT " and press [OK] to finish the setting. Note • When "CTRL OFF " is set, the ARC function will be disabled. Be sure to make the optical digital connection or analog connection. (➜ page 9) Adjusting the time lag between audio and video by delaying audio output You can reduce audio and video time lag by adjusting sound delay. 1. Press and hold [-SETUP, OFF] for about 2 seconds. The setting items are displayed. (➜ page 21) 2. Press [w][q] to select "SOUND DLY " and press [OK]. 3. Press [e][r] to select the setting and press [OK]. AUTO, OFF, 10, 20, 30, 40, 60, 80, 100, 120, 140,160, 180, 200 Factory setting: AUTO 4. Press [ RETURN] several times to select "EXIT " and press [OK] to finish the setting. Note • If delaying audio output is not necessary, select "OFF ". • "AUTO " is effective only when connecting the Panasonic TV (VIERA) supporting HDAVI Control 3 and later versions. (Auto Lip Synchronization Function) • When you connect the Panasonic TV incompatible with HDAVI Control 3 and later versions or non-Panasonic TV, if "AUTO " is set, "40 " (msec) is set. Switching between dual sounds You can switch between dual sounds of Dolby Digital signals. 1. Press and hold [-SETUP, OFF] for about 2 seconds. The setting items are displayed. (➜ page 21) 2. Press [w][q] to select "DUAL PRG " and press [OK]. 3. Press [e][r] to select the audio and press [OK]. MAIN : Main audio SAP : Sub channel audio output M+S : Main + Sub channel audio output Factory setting: MAIN 4. Press [ RETURN] several times to select "EXIT " and press [OK] to finish the setting. Clear audio at low volume Dynamic range compression function for Dolby Digital. It compresses the dynamic range so that you can still hear dialog and leave the sound field unaffected. Use this function when you have to turn the volume down, such as late at night. 1. Press and hold [-SETUP, OFF] for about 2 seconds. The setting items are displayed. (➜ page 21) 2. Press [w][q] to select "DRCOMP " and press [OK]. 3. Press [e][r] to select the setting and press [OK]. OFF : Normal playback STANDARD : The best suited playback for each audio source MAX : Always compressed at the maximum level Factory setting: OFF 4. Press [ RETURN] several times to select "EXIT " and press [OK] to finish the setting. Switching the attenuator Switch the attenuator "ON " when big sounds become distorted while playing an analog input source. 1. Press and hold [-SETUP, OFF] for about 2 seconds. The setting items are displayed. (➜ page 21) 2. Press [w][q] to select "ATTENUATOR " and press [OK]. 3. Press [e][r] to select "ON " and press [OK]. ON, OFF Factory setting: OFF 4. Press [ RETURN] several times to select "EXIT " and press [OK] to finish the setting. Play 23 VQT2R70