Panasonic SDRS150 SDRS150 User Guide - Page 90
VERIFYING THE DRIVER, Display [Device Manager], and check
UPC - 037988254460
View all Panasonic SDRS150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Verifying the driver If the driver does not work properly, follow the steps below to verify if it has been recognized properly. Select the unit's mode, connect the unit to the PC via the USB cable, then verify the driver. (P83) ≥ With some PCs including those made by NEC, the Device Manager may not be displayed if a mode that places restrictions on the functions has been established. Consult the manufacturer or follow the steps in your PC's operating instructions to establish a mode in which all the functions can be used, then proceed with operation. 1 Select [start]>([Settings]>) [Control Panel]>([Performance and Maintenance]>) [System]. 2 Display [Device Manager], and check whether the driver has been installed properly. ≥ Click the [Hardware] tab, then click [Device Manager]. ∫ If the driver has been recognized properly (When the unit is in the motion picture recording or still picture recording mode) Windows XP: [USB composite device] is displayed at [USB controller] and [USB video device] at [Imaging device]. ≥ If two, three or more SD video cameras are connected, [USB video device #X (X: number)] may appear. Windows 2000: [Panasonic SD Video Camera Web Camera Device] appears at [Imaging device]. (When the unit is in PC Connection mode) [USB Mass Storage Device] appears at [USB (Universal Serial Bus) controller]. 90 VQT0X39