Panasonic TD7896W User Guide - Page 17

Operation for the KX-TA308/624/824 Desired Function Redial*1 One-touch Dialing To program 0 To dial Operation Making Calls 1 X idle F-Key (0-9, , #) OR 2 phone no. idle F-Key X One-touch Dialing Key (0-9, , #) OR Calling an operator Speed Dialing (Personal) Speed Dialing (System) Calling back a caller using the Incoming Call Log (KX-TA624/ 824 only) One-touch Dialing Key 0 To store 2 To dial # To dial To program 0 personal speed dial no. desired no. # personal speed dial no. 2 system speed dial no. X idle F-Key (0-9, , #) OR idle F-Key 6 Assign as Caller ID Indication-Personal 9 6 Assign as Caller ID Indication-Common To dial X Caller ID Indication- Personal/Common Key (0-9, , #) OR X Caller ID Indication- Personal/Common Key (0-9, , #) OR Caller ID Indication- Personal/Common Key desired Incoming Call Log * Caller ID Indication- Personal/Common Key * Caller ID is displayed for about 20 seconds. If you press during that time period, the display goes blank until the time expires. While Caller ID is displayed or the display is blank, you cannot receive a call, make a call using or enter PBX Personal Programming mode. To return to the standby display, press then press . *1 You can use the last number stored in the PBX to make calls (Last Number Redial). However, in this case the number will not be stored as a new entry in the Outgoing Call Log. To display the last number you dialed, press 1 . 17