Panasonic TD7896W User Guide - Page 4
TALK/SP-PHONE Speakerphone, Meeting Mode, RECALL/FLASH, Left/Right Soft, POWER/CANCEL, Joystick - battery
UPC - 037988851645
View all Panasonic TD7896W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Location of Controls 1 TALK/SP-PHONE (Speakerphone) Key: Used to make or answer calls, or toggle between the two conversation modes (Receiver/Hands-free*) during a conversation. * You can talk with the other party alternately through the speaker without holding the handset. 2 HOLD Key: Used to place a call on Hold. 3 Meeting Mode Key: Used to turn Meeting Mode on or off when pressed for more than two seconds in standby mode. 4 RECALL/FLASH Key: Used to disconnect the current call and make another call without hanging up, or answer a Call Waiting from the telephone company. 5 Left/Right Soft Key: Used to select the function displayed directly above each key. Functions displayed depend on the state of use. 6 POWER/CANCEL Key: Used to end calls, exit the Phonebook or Function mode, or turn the handset on or off. 7 Joystick: Used to adjust the ringer/receiver volume, select the Function mode and the function displayed directly above it, and move the cursor to select a desired item. 8 TRANSFER/CLEAR Key: Used to transfer a call to another party, or clear digits or characters. 9 INTERCOM Key: Used to make or answer intercom calls. 4 Key Lock You can lock all keys other than the Joystick while the handset is in standby mode. Unlocked Locked Press the Joystick for more than 2 seconds to lock/unlock. Meeting Mode You can set the handset to prevent incoming calls from ringing. This can be useful in situations where you do not want to be disturbed, for example during a meeting. • During Meeting Mode, functions are: Function Microphone volume Status Up Low battery alarm Off Key tone Off Ringer/Voice Call/Paging/LCS Off Ring On Charger Off Vibrate On • During Meeting Mode or when Vibrate is set to Vib.& Ring and Vib. Ring, while handset is on charger: Function Status Vibrate* Off Ringer User Setting * Please note that, if you set the handset on the charger while receiving an incoming call, vibration will stop. Once the vibration stops, the handset will not vibrate again for that call, even if the handset is lifted up again. (If Quick Answer is set, lifting up the handset will answer the call.)